Default Configuration: | Gage Data Mode: |
USB-232 |
Output: |
Standard RS232 output (9600, N, 8, 1) |
|
9600 baud, no parity, 8 data bits, 1 stop bit |
||
Power: |
Gage must be powered externally or through Hirose port |
Standard USB/RS232 Terminal Output: Full output format: 15 characters |
|||||||||||||||||
Character Position |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
||
Data String |
+/- |
# |
# |
# |
# |
# |
# |
# |
# |
, |
|
# |
# |
<CR> |
<LF> |
||
Field Name |
Polarity |
Reading |
|
|
Units |
|
|||||||||||
Polarity |
-Negative numbers have a (-) sign in this place, positive numbers have a (+) sign |
|
|||||||||||||||
Reading |
-Measurement data captured from device, 8 digits, one is the decimal point1 |
|
|||||||||||||||
( , ) |
-A space and comma separate the reading from the units for easy parsing |
|
|||||||||||||||
Units |
-Units of the measurement (IN or MM)2 |
|
|||||||||||||||
Notes: |
1Numbers in the reading may include blank characters for readability |
|
Host Commands: |
||
Action |
Command |
Response |
Read an Input |
R <CR> |
Will return gage reading on port |
Clear CDI Gage | C <CR> | Will reset gage to zero |
Hold Enable/Disable | H <CR> | Will toggle hold state |